Desktop Low Cost Hybrid Fiber Laser Marking System

The Jimani Desktop Low Cost Hybrid System includes the following  components:

Laser Source- JPT Variable Pulse Width MOPA type laser. The standard laser is a JPT Model M7 in either a 30, 60 or 100 watt configuration.

1.5X Reversable Beam Expander  (read more here

Scanhead- Galvo Tech Scan Box 14 with standard XY2-100 interface

Focusing Lens- Opex F-Theta lens. Marking Field Sizes from 4.7 to 12 inches square

Control Board- RTC 4

Software- Leopardmark Laser Marking Software. Prolase Laser Marking Software available for additional charge. Both software packages are American Made and Jimani provides unlimited, no charge operational support.

Computer- Win 10 Pro 64 bit, 1 TB Solid State Drive, 8 GB ram installed

Manual Z Axis Desktop Workstation with 19 inches of Z Axis travel. Optional extended Z axis travel available

Footswitch for “hands free” laser operation

Two Year Warranty

Free Training and System Acceptance at Jimani Facility

Application and Hardware support from Jimani

Shipping is FOB Oxnard, CA.

Power Requirements: 115VAC 15 Amp Service


Manual X-Y Table to facilitate of parts placement and fixturing

Rotary for either “Handshaking” or DCA High Speed Rotary  DCA Rotary requires upgrade to Prolase 10 DCA Software

Fume Extractor- If marked material create excessive smoke or fumes, it is recommended to install some type of fume extraction to provide safety and comfort for the system operator and to protect the focusing lens from contamination

The Desktop version is an open frame system. It is a completely tested, calibrated and configured system and is ready for use as soon as it is removed from the shipping container and connected to a 115 VAC 15 amp power source. It is highly recommended that the operator use appropriate laser safety glasses when marking or engraving. One set of OD 6+ @ 1064nm laser safety glasses is provided with each system.

Contact Us